BFPMC - VP-31 PENETRANT(PRE 10/86)

  • MSDS: BFPMC
  • Manufacturer: MET L CHEK COMPANY
  • Product Name: VP-31 PENETRANT(PRE 10/86)
  • National Stock Number: 6850-00-782-2734
Product Identification

Product ID:VP-31 PENETRANT(PRE 10/86)
MSDS Date:01/01/1987
FSC:6850
NIIN:00-782-2734
MSDS Number: BFPMC

Responsible Party
MET-L-CHEK COMPANY
1639 EUCLID STREET
SANTA MONICA, CA 90404-3770
US

Emergency Phone: 213-450-1111

Info Phone: 213-450-1111

Cage: 98733

Contractor
MET-L-CHEK COMPANY
00000 SANTA MONICA, CA 90404 US

Telephone: 310-450-1111/FAX 310452-4046

Cage: 98733

Ingredients

SOLVENT PETROLEUM HYDROCARBON

Fraction By Weight: 100%

Hazards

Effects of Overexposure:IRRITATION OF RESPIRATORY TRACT.CENTRAL NERVOUS
SYSTEM STIMULATION FOLLOWED BY DEPRESS.OF VARY.DEGRS

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR,MAINTAIN RESPIRATION.
EYES:WASH WITH PLENTY OF WATER. SKIN:REMOVE BY WIPING, WASH WITH
SOAP & WATER

Fire Fighting

Flash Point:144F TCC
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:NONE.WATER NOT SUITABLE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. AVOID PROLONGED
BREATHING OF VAPORS. AVOID CONTACT WITH SKIN & EYES.

Handling

Handling and Storage Precautions:STORE BELOW 120F & OUT OF DIRECT RAYS
OF SUN. DO NOT EXPOSE TO FIRE.
Other Precautions:KEEP CONTAINERS CLOSED & CLEARLY LABELED.

Exposure Controls

Respiratory Protection:NONE UNDER PROPER CONDITIONS OF USE.
Ventilation:LOCAL EXHAUST WHEN MATERIAL IS SPRAYED.MECH AS REQD. FOR
TLV
Protective Gloves:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health
VP-31 PENTRANT LISTED UNDER GROUP I AND GROUP II IN QPL-25135-13 OF
MIL-I-25135,REVISION C; VP-31 HAS BEEN OBSOLETED & REPLACED BY
VP-31A BY THE MFR; SEE PNI-B OF THIS NSN FOR NEW P/N.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:350F
Vapor Pres:2.0
Vapor Density:4.0
Spec Gravity:0.8
Evaporation Rate & Reference:1.0, ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DEEP RED LIQUID, PLEASANT, OILY ODOR.
Percent Volatiles by Volume:75.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM SPARKS & OPEN FLAMES.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION WILL RELEASE CO.

Disposal

Waste Disposal Methods:HAUL AWAY FOR SAFE OUTDOOR DISPOSAL, OR HAUL
AWAY BY OIL RECLAIMERS OR SPRAY INTO AN INCINERATOR FOR BURNING
UNDER APPROVED CONTROLLED PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.